643 matches
84 actions
Transport for London Unified
84 actions
- Get a list of places corresponding to a given id and place types.GETv1.0.0
- Get active disruptions, filtered by road idsGETv1.0.0
- Get all valid routes for all lines, including the name and id of the originating and terminating stops for each route.GETv1.0.0
- Get all valid routes for given line ids, including the name and id of the originating and terminating stops for each route.GETv1.0.0
- Get car parks corresponding to the given stop point id.GETv1.0.0
- Get disruptions for all lines of the given modes.GETv1.0.0
- Get disruptions for the given line idsGETv1.0.0
- Get the list of arrival predictions for given line ids based at the given stopGETv1.0.0
- Get the occupancy for bike points.GETv1.0.0
- Gets a distinct list of disrupted stop points for the given modesGETv1.0.0
- Gets a list of active disruptions filtered by disruption Ids.GETv1.0.0
- Gets a list of all of the available journey planner modesGETv1.0.0
- Gets a list of all of the available place property categories and keys.GETv1.0.0
- Gets a list of disrupted streets. If no date filters are provided, current disruptions are returned.GETv1.0.0
- Gets a list of StopPoints corresponding to the given list of stop ids.GETv1.0.0
- Gets a list of StopPoints filtered by the modes available at that StopPoint.GETv1.0.0
- Gets a list of StopPoints within {radius} by the specified criteriaGETv1.0.0
- Gets a list of taxi ranks corresponding to the given stop point id.GETv1.0.0
- Gets a list of the available types of Place.GETv1.0.0
- Gets a list of the stations that serve the given line idGETv1.0.0
- Gets a list of valid disruption categoriesGETv1.0.0
- Gets a list of valid modesGETv1.0.0
- Gets a list of valid RoadDisruption categoriesGETv1.0.0
- Gets a list of valid RoadDisruption severity codesGETv1.0.0
- Gets a list of valid ServiceTypes to filter onGETv1.0.0
- Gets a list of valid severity codesGETv1.0.0
- Gets a StopPoint for a given sms code.GETv1.0.0
- Gets air quality data feedGETv1.0.0
- Gets all accident details for accidents occuring in the specified yearGETv1.0.0
- Gets all bike point locations. The Place object has an addtionalProperties array which contains the nbBikes, nbDocks and nbSpaces numbers which give the status of the BikePoint. A mismatch in these numbers i.e. nbDocks - (nbBikes + nbSpaces) != 0 indicates broken docks.GETv1.0.0
- Gets all disruptions for the specified StopPointId, plus disruptions for any child Naptan records it may have.GETv1.0.0
- Gets all lines and their valid routes for given modes, including the name and id of the originating and terminating stops for each routeGETv1.0.0
- Gets all places of a given typeGETv1.0.0
- Gets all places that matches the given queryGETv1.0.0
- Gets all roads managed by TfLGETv1.0.0
- Gets all stop points of a given typeGETv1.0.0
- Gets all the Crowding data (static) for the StopPointId, plus crowding data for a given line and optionally a particular direction.GETv1.0.0
- Gets all the stop points of given type(s) with a page numberGETv1.0.0
- Gets all valid routes for given line id, including the sequence of stops on each route.GETv1.0.0
- Gets any places of the given type whose geography intersects the given latitude and longitude. In practice this means the Place must be polygonal e.g. a BoroughBoundary.GETv1.0.0
- Gets lines that match the specified line ids.GETv1.0.0
- Gets lines that serve the given modes.GETv1.0.0
- Gets Stopoints that are reachable from a station/line combination.GETv1.0.0
- Gets taxis and minicabs contact informationGETv1.0.0
- Gets the available search categories.GETv1.0.0
- Gets the available searchProvider names.GETv1.0.0
- Gets the available sorting options.GETv1.0.0
- Gets the bike point with the given id.GETv1.0.0
- Gets the line status for all lines with a given severity A list of valid severity codes can be obtained from a call to Line/Meta/SeverityGETv1.0.0
- Gets the line status for given line ids during the provided dates e.g Minor DelaysGETv1.0.0
- Gets the line status of for all lines for the given modesGETv1.0.0
- Gets the line status of for given line ids e.g Minor DelaysGETv1.0.0
- Gets the list of arrival and departure predictions for the given stop point id (overground, Elizabeth line and thameslink only)GETv1.0.0
- Gets the list of arrival predictions for the given stop point idGETv1.0.0
- Gets the list of available StopPoint additional information categoriesGETv1.0.0
- Gets the list of available StopPoint modesGETv1.0.0
- Gets the list of available StopPoint typesGETv1.0.0
- Gets the next arrival predictions for all stops of a given modeGETv1.0.0
- Gets the occupancy for a car park with a given idGETv1.0.0
- Gets the occupancy for a charge connectors with a given id (sourceSystemPlaceId)GETv1.0.0
- Gets the occupancy for all car parks that have occupancy dataGETv1.0.0
- Gets the occupancy for all charge connectorsGETv1.0.0
- Gets the place overlay for a given set of co-ordinates and a given width/height.GETv1.0.0
- Gets the place with the given id.GETv1.0.0
- Gets the places that lie within a geographic region. The geographic region of interest can either be specified by using a lat/lon geo-point and a radius in metres to return places within the locus defined by the lat/lon of its centre or alternatively, by the use of a bounding box defined by the lat/lon of its north-west and south-east corners. Optionally filters on type and can strip properties for a smaller payload.GETv1.0.0
- Gets the predictions for a given list of vehicle Id's.GETv1.0.0
- Gets the road with the specified id (e.g. A1)GETv1.0.0
- Gets the service types for a given stoppointGETv1.0.0
- Gets the set of streets associated with a post code.GETv1.0.0
- Gets the specified roads with the status aggregated over the date range specified, or now until the end of today if no dates are passed.GETv1.0.0
- Gets the timetable for a specified station on the give lineGETv1.0.0
- Gets the timetable for a specified station on the give line with specified destinationGETv1.0.0
- Gets the TravelTime overlay.GETv1.0.0
- Gets the TravelTime overlay.GETv1.0.0
- Perform a Journey Planner search from the parameters specified in simple typesGETv1.0.0
- Returns the canonical direction, "inbound" or "outbound", for a given pair of stop point Ids in the direction from -> to.GETv1.0.0
- Returns the route sections for all the lines that service the given stop point idsGETv1.0.0
- Returns the service type active for a mode. Currently only supports tubeGETv1.0.0
- Search for bike stations by their name, a bike point's name often contains information about the name of the street or nearby landmarks, for example. Note that the search result does not contain the PlaceProperties i.e. the status or occupancy of the BikePoint, to get that information you should retrieve the BikePoint by its id on /BikePoint/id.GETv1.0.0
- Search for lines or routes matching the query stringGETv1.0.0
- Search StopPoints by their common name, or their 5-digit Countdown Bus Stop Code.GETv1.0.0
- Search StopPoints by their common name, or their 5-digit Countdown Bus Stop Code.GETv1.0.0
- Search the site for occurrences of the query string. The maximum number of results returned is equal to the maximum page size of 100. To return subsequent pages, use the paginated overload.GETv1.0.0
- Searches the bus schedules folder on S3 for a given bus number.GETv1.0.0
Other/Transport for London Unified
Gets the next arrival predictions for all stops of a given mode
v1.0.0Input
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
{
"type": "object",
"properties": {
"count": {
"type": "integer",
"format": "int32"
},
"mode": {
"type": "string"
}
},
"required": [
"mode"
],
"additionalProperties": false
}Output
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
{
"type": "array",
"items": {
"type": "object",
"description": "DTO to capture the prediction details",
"properties": {
"bearing": {
"type": "string",
"description": "Bearing (between 0 to 359)"
},
"currentLocation": {
"type": "string",
"description": "The current location of the vehicle."
},
"destinationName": {
"type": "string",
"description": "Name of the destination"
},
"destinationNaptanId": {
"type": "string",
"description": "Naptan Identifier for the prediction's destination"
},
"direction": {
"type": "string",
"description": "Direction (unified to inbound/outbound)"
},
"expectedArrival": {
"type": "string",
"format": "date-time",
"description": "The expected arrival time of the vehicle at the stop/station"
},
"id": {
"type": "string",
"description": "The identitier for the prediction"
},
"lineId": {
"type": "string",
"description": "Unique identifier for the Line"
},
"lineName": {
"type": "string",
"description": "Line Name"
},
"modeName": {
"type": "string",
"description": "The mode name of the station/line the prediction relates to"
},
"naptanId": {
"type": "string",
"description": "Identifier for the prediction"
},
"operationType": {
"type": "integer",
"format": "int32",
"description": "The type of the operation (1: is new or has been updated, 2: should be deleted from any client cache)"
},
"platformName": {
"type": "string",
"description": "Platform name (for bus, this is the stop letter)"
},
"stationName": {
"type": "string",
"description": "Station name"
},
"timeToLive": {
"type": "string",
"format": "date-time",
"description": "The expiry time for the prediction"
},
"timeToStation": {
"type": "integer",
"format": "int32",
"description": "Prediction of the Time to station in seconds"
},
"timestamp": {
"type": "string",
"format": "date-time",
"description": "Timestamp for when the prediction was inserted/modified (source column drives what objects are broadcast on each iteration)"
},
"timing": {
"type": "object",
"properties": {
"countdownServerAdjustment": {
"type": "string"
},
"insert": {
"type": "string",
"format": "date-time"
},
"read": {
"type": "string",
"format": "date-time"
},
"received": {
"type": "string",
"format": "date-time"
},
"sent": {
"type": "string",
"format": "date-time"
},
"source": {
"type": "string",
"format": "date-time"
}
}
},
"towards": {
"type": "string",
"description": "Routing information or other descriptive text about the path of the vehicle towards the destination"
},
"vehicleId": {
"type": "string",
"description": "The actual vehicle in transit (for train modes, the leading car of the rolling set)"
}
}
}
}