The points function tests many transmitters and one receiver and is designed for route analysis. A minimal request needs a transmitters array of (latitude,longitude,altitude) locations, antenna, receiver and output objects defined as a minimum. Model and environment options will enhance accuracy.
643 matches
8 actions
Cloud-RF
8 actions
- Create a point-to-multipoint heatmapPOSTv1.0.0
- Delete a calculation from the database.GETv1.0.0
- Delete an entire networkGETv1.0.0
- Find the best server for somewhereGETv1.0.0
- List calculations from your archiveGETv1.0.0
- Merge sites into a super layer.GETv1.0.0
- Point-to-multipoint path profile analysis (Many Tx, one Rx)POSTv1.0.0
- Point-to-point path profile analysis (Tx to Rx)POSTv1.0.0
Other/Cloud-RF
Point-to-multipoint path profile analysis (Many Tx, one Rx)
v1.0.0Input
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
{
"type": "object",
"properties": {
"antenna": {
"type": "object",
"properties": {
"ant": {
"type": "integer",
"format": "int32",
"description": "Antenna pattern code. 1=Vertical dipole (Omni-directional)"
},
"azi": {
"type": "integer",
"format": "int32",
"description": "Antenna azimuth in degrees north"
},
"hbw": {
"type": "integer",
"format": "int32",
"description": "Custom antenna horizontal beamwidth in degrees. For use only with ant=0"
},
"pol": {
"type": "string",
"description": "Antenna polarization as either h or v",
"enum": [
"h",
"v"
]
},
"tlt": {
"type": "number",
"format": "float",
"description": "Antenna tilt in degrees below the horizon (inverted)"
},
"txg": {
"type": "number",
"format": "float",
"description": "Transmitter antenna gain in dBi"
},
"txl": {
"type": "number",
"format": "float",
"description": "Feeder loss in dB"
},
"vbw": {
"type": "integer",
"format": "int32",
"description": "Custom antenna vertical beamwidth in degrees. For use only with ant=0"
}
}
},
"environment": {
"type": "object",
"properties": {
"cll": {
"type": "integer",
"format": "int32",
"description": "Clutter loss. 0=None/DSM only, 1=Hard / LOS mode, 2=Soft / NLOS mode"
},
"clm": {
"type": "integer",
"format": "int32",
"description": "Clutter mode. 0=None/DSM only, 1=System & custom clutter, 2=Custom clutter only"
},
"mat": {
"type": "number",
"format": "float",
"description": "Clutter attenuation override in dB/m based on a tree block OR hollow building. Light foliage=0.1dB/m, brick=1.0dB/m, concrete=5dB/m"
}
}
},
"model": {
"type": "object",
"properties": {
"cli": {
"type": "integer",
"format": "int32",
"description": "Radio climate for ITM model (1). 1: Equatorial (Congo) 2: Continental Subtropical (Sudan) 3: Maritime Subtropical (West coast of Africa) 4: Desert (Sahara) 5: Continental Temperate 6: Maritime Temperate, over land (UK and west coasts of US & EU) 7: Maritime Temperate, over sea"
},
"ked": {
"type": "integer",
"description": "Knife edge diffraction for enhancing basic empirical models (Already in ITM)"
},
"pe": {
"type": "integer",
"format": "int32",
"description": "Propagation model subtype/environment. 1=Conservative/Urban,2=Average/Suburban,3=Optimistic/rural"
},
"pm": {
"type": "integer",
"format": "int32",
"description": "Propagation model. 1=Irregular Terrain Model, 2=Line of Sight (LOS), 3=Hata, 4=ECC33, 5=SUI Microwave, 6=COST231, 7=Free space path loss, 9=Ericsson9999, 10=Plane earth loss, 11=Egli."
},
"rel": {
"type": "integer",
"format": "int32",
"description": "ITM model required reliability as %"
},
"ter": {
"type": "integer",
"format": "int32",
"description": "Terrain code for ITM model (1). 1=Water,2=Wet ground,3=Farmland,4=Forest/Average,5=Mountain/Sand,6=City/Poor ground"
}
}
},
"network": {
"type": "string",
"description": "Network name/group"
},
"output": {
"type": "object",
"properties": {
"ber": {
"type": "integer",
"format": "int32",
"description": "Bit error rate. 1=0.1, 2=0.01, 3=0.001, 4=0.0001,5=0.00001,6=0.000001. >6=Lora: 7=SF7,8=SF8,9=SF9,10=SF10,11=SF11,12=SF12"
},
"col": {
"type": "string",
"description": "Colour schema code OR filename. 1 = Cellular (5), 2=Red, 3=Green, 4=Blue, 5=Microwave(7), 7=Custom RGB, 8=Automatic by frequency, 9=Greyscale / GIS, 10=Rainbow(24), 11=Green/Blue/Red, 13=Sub noise floor (10), 14=TV broadcasting (4), 15=Red threshold, 16=Green threshold, 17=Blue threshold. RAINBOW.dBm, CUSTOMSCHEMA.dBm.."
},
"mod": {
"type": "integer",
"format": "int32",
"description": "Modulation. 1=4QAM,2=16QAM,3=64QAM,4=256QAM,5=1024QAM,6=BPSK,7=QPSK,8=8PSK,9=16PSK,10=32PSK,11=LoRa"
},
"nf": {
"type": "integer",
"format": "int32",
"description": "Noise floor in dBm for use with out=4 / SNR"
},
"out": {
"type": "integer",
"format": "int32",
"description": "Measured units. 1=dB,2=dBm,3=dBuV,4=SNR"
},
"rad": {
"type": "number",
"format": "float",
"description": "Radius in kilometres for output"
},
"res": {
"type": "integer",
"format": "int32",
"description": "Resolution in metres for output"
},
"units": {
"type": "string",
"description": "Distance units in either metres/kilometres (metric) or feet/miles (imperial)",
"enum": [
"metric",
"imperial"
]
}
}
},
"points": {
"type": "array",
"items": {
"type": "object",
"properties": {
"alt": {
"type": "number",
"format": "float",
"description": "Altitude above ground level in metres OR feet"
},
"lat": {
"type": "number",
"format": "float",
"description": "Latitude in decimal degrees"
},
"lon": {
"type": "number",
"format": "float",
"description": "Longitude in decimal degrees"
}
}
}
},
"receiver": {
"type": "object",
"properties": {
"alt": {
"type": "number",
"format": "float",
"description": "Altitude above ground level in metres OR feet"
},
"lat": {
"type": "number",
"format": "float",
"description": "Latitude in decimal degrees"
},
"lon": {
"type": "number",
"format": "float",
"description": "Longitude in decimal degrees"
},
"rxg": {
"type": "number",
"format": "float",
"description": "Receiver antenna gain in dBi"
},
"rxs": {
"type": "number",
"format": "float",
"description": "Receiver sensitivity/threshold in measured units defined by 'out' param"
}
}
},
"site": {
"type": "string",
"description": "Site name"
},
"transmitter": {
"type": "object",
"properties": {
"alt": {
"type": "number",
"format": "float",
"description": "Altitude above ground level in metres OR feet"
},
"bwi": {
"type": "number",
"format": "float",
"description": "Bandwidth in MHz. 1MHz has a noise floor of -114dBm. 10MHz = -104dBm, 20MHz = -101dBm"
},
"frq": {
"type": "number",
"format": "float",
"description": "Centre frequency in megahertz"
},
"lat": {
"type": "number",
"format": "float",
"description": "Latitude in decimal degrees"
},
"lon": {
"type": "number",
"format": "float",
"description": "Longitude in decimal degrees"
},
"txw": {
"type": "number",
"format": "float",
"description": "Transmitter power in watts before the antenna"
}
}
}
}
}Output
- 1
- 2
- 3
- 4
{
"type": "object",
"additionalProperties": true
}